Car Servicing

Reliable servicing for your car in Hamilton

We recommend that you have your vehicle serviced every 10,000 km or once per year to keep it in running correctly and to prevent future problems.

At Grimmer Motors we offer 3 levels of servicing to suit your needs, with our recommendations for each based on how long you intend to keep your vehicle (as below)

Book Now

Our Servicing Packages

Standard Service

Premium Service

Hybrid Service

EV Service

Standard Service

For specific service pricing for your vehicle, please send us a message through the Contact Us form

Remove and replace engine oil
Replace engine oil filter
Check brake fluid levels, fill if necessary
Check clutch fluid levels, fill if necessary
Check power steering fluid levels, topping up if needed.
Check and top up gearbox/auto transmission fluid level
Check differential fluid level, topping up if needed.
Top up windscreen wiper fluid, testing spray pattern
Check antifreeze condition, refilling radiator if necessary.
Perform a visual inspection of the cooling system including radiator, radiator cap and hoses
Visually inspect the air filter
Check the condition and tread depth of tyres, (including spare)
Check and adjust the pressure of tyres (including spare)
Check wiper blades and assess their performance
Check windscreen for any noticeable damage
Clean windscreen
Check indicator lights, brake lights, reverse lights and number plate lights
Reset service light/service interval where applicable (subject to data and tooling availability)
Lubricate door hinges
Check tension and condition of all belts (excluding the cambelt)
Search for the last replacement date/mileage of the cambelt (if applicable)
Check boot latch and catch for any rust damage
Check bonnet latch and catch for any rust damage
Check drivers door opens and closes correctly
Test horn
Road test the vehicle up to 50km/hr
Test battery condition, examine terminals and battery connections
Check battery security and top up battery fluid (non-sealed units only)

Premium Service

For specific service pricing for your vehicle, please send us a message through the Contact Us form

Remove and replace engine oil
Replace engine oil filter
Check brake fluid levels, fill if necessary
Check clutch fluid levels, fill if necessary
Check power steering fluid levels, topping up if needed.
Check and top up gearbox/auto transmission fluid level
Check differential fluid level, topping up if needed.
Top up windscreen wiper fluid, testing spray pattern
Check antifreeze condition, refilling radiator if necessary.
Perform a visual inspection of the cooling system including radiator, radiator cap and hoses
Visually inspect the air filter
Check the condition and tread depth of tyres, (including spare)
Check and adjust the pressure of tyres (including spare)
Check wiper blades and assess their performance
Check windscreen for any noticeable damage
Clean windscreen
Check indicator lights, brake lights, reverse lights and number plate lights
Reset service light/service interval where applicable (subject to data and tooling availability)
Lubricate door hinges
Check tension and condition of all belts (excluding the cambelt)
Search for the last replacement date/mileage of the cambelt (if applicable)
Visually inspect spark plugs, giving advice on their condition
Check bonnet latch and catch for any rust damage
Check drivers door opens and closes correctly
Test horn
Road test the vehicle up to 50km/hr
Test battery condition, examine terminals and battery connections
Check battery security and top up battery fluid (non-sealed units only)
Inspect the exhaust system and mounts
Visually inspect engine/transmission mounts
Visually check turbo oil feed pipes for any leaks (if applicable)
Visually check fuel filter (if reachable)
Check the cabin air filter
Check that all seat belts work correctly
Check the electrical charging system
Visually inspect high tension leads and components
Visually inspect the steering rack
Visually inspect the CV joints/boots
Examine steering components for wear and damage
Visually examine the suspension system for leaks, wear or corrosion
Remove wheels and visually inspect brake pads and discs
While wheels are removed, visually inspect the brake linings/wheel cylinders/drums for wear and damage
Rotate tyres (if required)
Check wheel bearings for any excessive noise
Check handbrake/footbrake and adjust if needed
Visually inspect spark plugs, giving advice on their condition
Check air conditioning system

Hybrid Service

Remove and replace engine oil
Replace engine oil filter
Cleaning the hybrid cooling system battery vents and filters
Checking the condition and level of the hybrid inverter cooling fluid
Check brake fluid levels, fill if necessary
Check clutch fluid levels, fill if necessary
Check power steering fluid levels, topping up if needed.
Check and top up gearbox/auto transmission fluid level
Check differential fluid level, topping up if needed.
Top up windscreen wiper fluid, testing spray pattern
Check antifreeze condition, refilling radiator if necessary.
Perform a visual inspection of the cooling system including radiator, radiator cap and hoses
Visually inspect the air filter
Check the condition and tread depth of tyres, (including spare)
Check and adjust the pressure of tyres (including spare)
Check wiper blades and assess their performance
Check windscreen for any noticeable damage
Clean windscreen
Check indicator lights, brake lights, reverse lights and number plate lights
Reset service light/service interval where applicable (subject to data and tooling availability)
Lubricate door hinges
Check tension and condition of all belts (excluding the cambelt)
Search for the last replacement date/mileage of the cambelt (if applicable)
Check boot latch and catch for any rust damage
Check bonnet latch and catch for any rust damage
Check drivers door opens and closes correctly
Test horn
Road test the vehicle up to 50km/hr
Test battery condition, examine terminals and battery connections
Check battery security and top up battery fluid (non-sealed units only)